Celebrate!

For the March Make and Take I wanted to squeeze as much Sale-A-Bration goodness in as I could before Sale-A-Bration ended. So here is the first of the cards that my guests made. This card was cased from Tina Gillespie's card that you can find HERE. I just loved her gold embossed dots with the dotted DSP. 

• Bermuda Bay card stock 4-1/4" x 11", scored at 5-1/2"
• Basic Black card stock 2" x 4-3/4"
• Sweet Sorbet DSP 1-7/8" x 4-5/8"
• Basic Black card stock 1-7/8" x 3-5/8"
• Gold 1-3/4" x 3-1/2"
• Basic Black card stock 1/2" x 3-3/8"
• Whisper White card stock 3/4" x 3-1/2"
• Basic Black card stock 3/4" x 4-1/4"
• Sweet Sorbet DSP 1/2" x 4-1/4"
• Stamps: Express Yourself, Perfect Pennants
• Ink: Bermuda Bay
• Accessories: Decorative Dots embossing folder, Stampin' Dimensionals, Paper Snips, Banner Punch, 1-3/8" Circle Punch, 1-1/4" Circle Punch

This really was simple enough to do, just a lot of different pieces. I folded the Bermuda Bay card stock on the score line. Then I stuck the large piece of Sweet Sorbet DSP onto the large piece of Basic Black card stock. I glued this down directly onto the card front with some Glue Stick. 

Next I embossed the gold paper in the Decorative Dots embossing folder in the Big Shot. This was glued onto the next smaller piece of Basic Black card stock and then stuck onto the card front with some Stampin' Dimensionals. 

I took the 3/4" wide strip of Whisper White card stock and stamped the banner from Perfect Pennants on it in Bermuda Bay ink. I used Paper Snips to trim out the banner, glued it onto the 3/4" wide strip of Basic Black card stock and trimmed the banner end. This was glued onto the card front by sliding it under the gold panel. 

Next I stamped "celebrate" from Express Yourself onto a scrap of Whisper White card stock in Bermuda Bay ink. This was punched out with the 1-1/4" Circle punch. A scrap of Basic Black card stock was punched with the 1-3/8" Circle punch. I stuck the two circle layers together then stuck it onto the gold paper with a Stampin' Dimensional.

For some fun on the inside I stamped the banner from Perfect Pennants three times in Bermuda Bay ink. To get the faded look ink up the stamp once, then stamp three times without inking again. Glue the narrow strip of DP onto the narrow strip of Basic Black. Glue this inside the card at the top. Then I just took the Banner Punch and used it on a scrap of gold paper and stuck the shiny banner against the Basic Black card stock. 

So other than having to cut all those pieces it really is a pretty easy card! Thanks Tina for the wonderful inspiration!

Welcome to our Firepit

Another project finished! My sister had mentioned a while ago that she wanted to get a sign for outside near their pinspired firepit. She found this one and saved it to her outdoor Pinterest board. I said it was totally do-able without spending the big bucks on the ones on Etsy which happened to be much smaller than what my sis had in mind. 

I was going to see if I could swipe a pallet from work and deconstruct it to make the sign. But then my husband wanted to clean out the utility room and remove a shelf that was probably built in 1950 at the same time as the house. It was old and would sway if you pushed it with your finger on one of the sides. So we moved it outside of the garage to be taken to the curb the next trash day. 

Well one day shortly after coming home and seeing the shelf outside of the garage a little light bulb popped up. Why not tear apart the shelf and use the boards from the shelves to make the sign! So I went outside with a hammer and took the shelf apart to get the shelf boards. The sides were 2 x 8 and I'm not sure what to do with them right now. 

No, this was not finished in the fall. I finished it up just last Friday. We have oak trees in our yard that don't really lose all their leaves until spring when the new ones come out. So we don't bother cleaning up leaves until spring. And by cleaning up leaves I mean running them over with the lawn mower and a mulching blade... But the leaves cover up the dead brown grass pretty well.

So I basically cut three of the shelves to the same length and used the saw table to rip down the edges of two of the boards so that the finished sign was 20" wide. I cut three boards for the back then went to town sanding off the old paint with an orbital sander. I sanded it almost all the way but loved the dark lines that were left. 

Then I applied some wood glue to the edges and placed the boards next to each other (making sure the perfect cut edges were against the center board so the old edges were on the outside). Then I placed the boards across the back and put in 1" long screws to hold everything secure. I'm just loving the look of the old wood! 

Then it was ready for some paint! I used my Silhouette to cut out a variety of fonts and the fire pit shape in some 12" x 12" card stock. I held the card stock stencils onto the board with some painter's tape and used a small sponge to dab the paint inside the stencil. 

I had initially painted the word "firepit" in white but after I had everything else done I thought it could use some more color so I added some light yellow and darker yellow to the letters.

Then I toasted "toasted" with two shades of a cream colored paint and some brown paint. After the paint dried I covered the front, edges, and back with about 6 coats of a matte finish Rustoleum sealer.

It's not perfect. The spacing on some of the words could have been closer and there were some spots where the paint bled under the stencil, but I love those imperfections. They show the love that went into making this lovely sign.

The finished sign is about 20" x 30". The best part about this project? It cost a whopping $4.00 for a can of spray sealer. Everything else I already had at home. Not to mention it recycled an old shelf that was just headed for the landfill. And I still have a couple beautifully sanded boards for some other project in the future. I'm thinking maybe a Corbet Family Est. 2005 sign.

Now Kelly and Eric just have to figure out how they want to hang it!

Any ideas on what I can make with the two 2 x 8 boards I have left? They are about 4-1/2 feet long. I'm thinking maybe a bench for outside? Any thoughts?

Updated to add:
A smaller version of this sign is for sale in my Etsy shop! Just click HERE to view all my hand painted signs. Looking for a custom size? Just send me a message via Etsy or E-mail and I build it as large as you like. Just be advised that pricing and shipping costs are more with a larger sign.

Linking up here:
Tuesday Talent Show at Chef in Training
Create Link Inspire at The Crafty Blog Stalker
Fabulously Creative Friday at Jennifer Rizzo
Wow Me Wednesday at Gingersnap Crafts
Your Whims Wednesday at My Girlish Whims
T.G.I.F. Linky Party at Mamas Blog Central
Thrifty Thursday at Living Well Spending Less
Fabulously Creative Friday at Jennifer Rizzo
Inspiration Exchange April Link Party at Clean and Scentsible
Monday Funday at C.R.A.F.T.
Saturday Sharefest at The SITS Girls
April Before and After at The Thrifty Decor Chick
Show Me What Ya Got at Not Just a Housewife

Spring Wreath

It's finally spring!!! Now if only Mother Nature would decide for it to be spring and actually stay above freezing for more than a day at a time...

A little over a week ago I got out all my Easter and spring decorations (which isn't very much) and put them on display around the house. I've known for a while now that I wanted a simple grapevine wreath to hang on the front door that I can easily change up for the different seasons with some fake flowers. 

I picked up all these lovely flowers at Joann's. They were in bunches so I took some wire cutters and cut each flower stem apart then just stuck the stem into the wreath form. No glue because I want to be able to pull these out and switch out the flowers for each season. 

I tied a quick bow with some burlap ribbon from Stampin' Up! then stuck a wire through the ribbon and poked the wire into the wreath form. I took some more wire and made a loop to hang the wreath from, weaved it through the wreath form then wrapped the wire ends around the base of the loop. Then the wreath was hung onto the front door with a brushed nickel looking command hook.

I just now realized that the brushed nickel hook totally clashes with the brass in the window of the door. Oops. Oh well.

Here I'm just playing around with different angles and I couldn't decide which one I liked more so you get both! 

Yes, I totally just posted 6 pictures of a simple wreath that took a whopping 10 minutes to put together. And 5 of that was trying to tie a burlap bow that was visually appealing.

Also, after editing the 34 photos I took of the wreath down to the six you see above I realized just how dirty our front door was and promptly took the wreath down to take a mr. clean sponge to the door and put the wreath back up.

I'm thinking that our door needs a fresh coat of paint. But what color??? Maybe I should just play it safe and stick with the white...

I Am...

Here is another fun Mixed Media Monday inspired project! I followed along with Tracy and painted this lovely last week.

• Paint (DecoArt): Whispering Turquoise, Citron Green, Titanium White, Turquoise Waters, Decou Page
• Paper: Basic Gray
• Stencil: Heidi Swapp butterflies
• Other: molding past, fine point sharpie, pan pastels, Basic Black stampin' spot, black pastel pencil, The Paper Studio gemstones, workable fixative, flat brush, and round brush

The chevron patterned paper in the background that you can barely see is Basic Gray from one of my Frosted Designs kits. That's all I know. I was too happy to work on something fun that I didn't pay attention to the collection it came from. That was stuck down with some decoupage.

I painted on the blue and green thinned down with a little bit of water to make it kind of a wash. Once that dried I took the lacy laser cut paper from the retired Stampin' Up Flirtatious DSP pack that I could never figure out how to use and I placed it over the paper and sprayed Maya Mist in White Out then picked up the lacy paper.

This stuff takes FOREVER to dry and I am one impatient crafter. I let it sit and just cleaned up around by craft room for about 10 minutes but it still wasn't dry so I heated it up with my heat tool for about five more minutes and some places still weren't dry. Maybe I'm spraying it on too heavy?

Next I painted on some loopy flowers in titanium white. Then I took the end of my paint brush (not the brush end) dabbed it in white paint, and added lots and lots of white dots around the inside and outside of my flower petals.

I took some Pan Pastel in a bright pink shade and added that inside my flower petals. That really made those dots pop! Some yellow Pan Pastel was used to add color to the flower centers. Next up some doodling with a sharpie. Then i used some molding paste to add these butterflies with a stencil. I heated that with my heat tool to speed up the drying process and they puffed up creating some wonderful texture. More Pan Pastel here in the same pink. Then I laid the stencil back over the butterflies and sprayed on some gold mist.

The large I Am was free handed with a flat brush and some citron paint. Then I went around the letters and the butterflies with my pastel pencil to add some shadows and grunginess. 

I took a fine point sharpie to add some words of what I am around the flower on the bottom. Then I went around the edges of the paper with a Basic Black Stampin' Spot to grunge it up some more.

Finally I added a nice coat of workable fixative to make sure that my pastels didn't wipe off. Once that dried I added the three gemstones for my dot dot dot.

I am totally loving this page and I was so happy to get the time just to paint along with Tracy and have some fun. I'm linking this to Tracy's March Creative Dare. Hop on over to see what some of the other ladies have made!

Linking up here:
Art Journal Every Day at Balzer Designs

Bloom

I took the time to play with some paint last week and painted along with Tracy in her re-run of the Mixed Media Monday from February 25th. I have no idea what paints I used. Tracy goes FAST! If it weren't for the pause button on my tablet I would never have been able to keep up! 

The paint is all acrylic and mostly DecoArt brand. I used a fine point sharpie to add the doodling and a Signo Gel Pen for the white in the doodles. The buttons are retired from Stampin' Up. I also used a black pastel pencil to add the shadows. 

Oh and the background was all done with a wadded up paper towel by dabbing it into the paint and dabbing it all over the canvas. 

Note to self ~ When dabbing paint onto anything..... wear gloves or your hands will be completely covered in paint. Messy painter here! 

The word "Bloom" was free handed with a flat brush and white paint. Then doodled over with a fine point sharpie and shadow added with the pastel pencil. 

I had such a great time! Not to mention I really love this page!

Linking up here:
Art Journal Every Day at Balzer Designs

Tag Punch Treat Holder

I really wanted to showcase both of the Tag Topper Punches at the February Make and Take. So I made this lovely little treat box which happens to be the perfect size to hold two Ghirardelli chocolates (Yum!). I love those! Especially the dark chocolate sea salt caramel! I've seen a number of these floating around in blog land lately and wanted to add my own spin on it. So here is a fun tutorial for you! 

• Cherry Cobbler Card Stock 2” x 7-7/8”
• Retro Fresh DSP 1” x 7-7/8”
• Retro Fresh DSP 1-1/4” x 5-1/4”
• 16” Whisper White Baker’s Twine
• 13” Coastal Cabana Sweet Sorbet Twine
• Stamps: Banner Blast
• Ink: Cherry Cobbler, Calypso Coral, Crushed Curry
• Accessories: Stampin’ Dimensionals, Cherry Cobbler Dazzling Details, Scalloped Tag Topper Punch, Banner Punch, Simply Scored

Take the Cherry Cobbler card stock and place it on your Simply Scored with the 7-7/8" edge against the top. Now score at 3-1/2" and 4-1/8". Use some glue stick to add your 1" wide strip of DSP onto the Cherry Cobbler card stock and fold on the score lines. Now punch both ends of your card stock strip with the Scalloped Tag Topper Punch.

Take the 1-1/4" x 5-1/4" piece of Retro Fresh DSP and place it on your Simply Scored with the 5-1/4" edge against the top. Score at 1”, 1-5/8”, 3-5/8”, and 4-1/4”. Use some glue stick to glue one end of the strip onto the inside of the tag punched shape as shown. Line up the bottom edge of the DSP with the score line on the tag. Also line up the score line in the DSP with the edge of the tag. 

Fold the DSP around and glue the other end onto the inside of the tag as shown.

Now add a little bit of glue stick onto the other end of the tag shape and press it down onto the DSP to close the little box.

Insert your chocolates into the lovely little pocket then thread the twine through the slot at the top and tie it into a bow. Take the white baker's twine and wrap it around the top of the tag twice and tie it into a knot. Then use Paper Snips to trim the ends of the twine close to the knot. 

Stamp three of the banners from Banner Blast onto a scrap of Very Vanilla card stock in Cherry Cobbler, Calypso Coral, and Crushed Curry ink. Take the small heart image and stamp it onto the love banner in Cherry Cobbler ink. Then punch out the banners with the Banner Punch and stick each banner onto the treat holder with a Stampin' Dimensional. 

Just for a little added glam add some Cherry Cobbler Dazzling Details into the heart stamped on the love banner.

Super cute and a super sweet little gift to give a special someone.